Professional resources
Technology & Window Treatments for Interior Designers
Interior designers
Designers care about the things most integrators overlook: the finish of a keypad, the return on a drapery panel, the fabric hand, the fact that a speaker grille lands three inches off the ceiling grid.
We run an in-house drapery workroom and specify from the full window treatment palette — motorized roller and roman shades, drapery tracks, shutters, sheers, and hand-fabricated panels — alongside the lighting and AV that shares the same ceiling and wall.
How we support your work
- In-house workroom for custom drapery and Roman shades
- Full palette: motorized rollers, drapery tracks, shutters, sheers, and layered treatments
- Fabric sourcing, COM handling, and hand samples for your presentation
- Field measures and installation by our own team
- Keypad, thermostat, and device finish selection to match hardware
- Speaker and grille placement coordinated to your ceiling layout
- Concealment strategies for displays, projectors, and equipment
- Lighting scenes tuned on site so finishes and art read correctly
How we engage
Where we join the project — and what happens next
- 1
Concept & selections
We review the design intent and window schedule with you, present fabric and hardware options, and identify where motorization or concealment is needed.
- 2
Specification
Treatments, control finishes, and AV concealment are documented against each room so quantities, fabrics, and finishes are locked before ordering.
- 3
Fabrication & field measure
Our workroom fabricates while our installers field-measure the finished openings — the step that prevents the fit problems designers dread.
- 4
Install & scene tuning
We install, dress the panels, and then tune the lighting scenes after dark so every finish, fabric, and piece of art is lit the way you intended.
More than motorized shades
Roller shades are the starting point, not the whole offering. Our workroom fabricates drapery panels, Roman shades, and valances, and we install drapery tracks, shutters, and layered sheer-plus-blackout treatments — motorized or manual, to the same finish standard.
Lighting that flatters the design
We tune scenes on site after finishes are installed — warm-dim and tunable-white sources set so millwork, stone, textiles, and art render honestly at every hour instead of washing out under one flat setting.
Systems we coordinate
Common questions
For interior designers
Do you fabricate custom drapery in-house?
Yes. We operate our own drapery workroom, so panels, Romans, and valances are fabricated, inspected, and installed by our team rather than drop-shipped.
Can you work with client's own material (COM)?
Yes, we accept COM and will advise on yardage, railroading, and suitability for motorized applications before you order.
Can device finishes match our hardware selections?
Keypads, faceplates, and shade hardware come in a wide finish range, and we will provide samples so they coordinate with your plumbing and door hardware.
Do you handle both the treatments and the AV?
Yes, and that is the point — the same team owns the ceiling, the walls, and the windows, so nothing collides at install.
Take it further
Planning references for your team
Every guide below is written for project teams. Start with the prewire library or browse the full Knowledge Center.
Have a project in design?