Serving Castle Rock, Colorado
Custom AV & Automation in Castle Rock.
New-construction prewire, lighting control, motorized shading, theater, audio, and networking for Castle Rock's custom homes and golf-course estates.
About our work in Castle Rock
A trusted home technology partner in Castle Rock.
Castle Rock is one of the most active custom-build markets on the Front Range, and the best results start before drywall. We join the design team early — coordinating low-voltage prewire, lighting layouts, keypad placement, shade pockets, and rack locations with your builder, architect, and electrician so nothing is compromised later.
For existing homes, we retrofit with wireless lighting, battery-powered shades, and discreet audio that respects the finishes already in place. Either way, the system is documented, labeled, and supported by our Englewood team for the life of the home.
What's different about a Castle Rock project
A build-heavy market where the schedule is the constraint.
Most of the work happens before drywall
Castle Rock is dominated by active custom construction, which means our involvement is measured against the builder's schedule rather than the homeowner's. Prewire has to land in the window between rough electrical and insulation, and that window moves. We keep a project manager on the trade schedule so the rough-in happens when the house is ready, not two weeks after it closed up.
Large-lot and ranch parcels on the south end
Bell Mountain Ranch, Diamond Ridge, and the surrounding acreage properties bring detached shops, arenas, gated entries, and long driveways. Conduit and fiber during site work is the only cost-effective way to reach them, so those runs need to be in the low-voltage plan before the excavator leaves.
Elevation, sun, and exposed sites
Castle Rock sits above 6,000 feet on largely open ground. Intense UV degrades exterior finishes and unrated equipment faster than in the metro, and unshaded south and west glass produces real heat gain. We specify exterior-rated hardware honestly and lean on automated solar shading to manage load rather than oversizing mechanical systems.
Trade coordination is the deliverable
The difference between a clean install and a compromised one is whether the electrician, framer, drywaller, and cabinet shop knew where our devices were going. We issue low-voltage plans, lighting and keypad schedules, and shade-pocket details to the whole team, then walk the rough-in before insulation to catch problems while they are still free to fix.
Recent Colorado work
Projects across the Front Range.
Cherry Hills Village, CO
Cherry Hills Estate
Every subsystem in this Cherry Hills estate now answers to one interface: lighting scenes, shades, music, video, climate, cameras, and gates.
View case study
Cherry Hills Village, CO
Cherry Hills Theater
A purpose-built cinema where the acoustics were designed before the finishes — reference projection, immersive surround, and a room that disappears when the lights drop.
View case study
Greenwood Village, CO
Pool House & Ketra Lighting
Tunable Ketra lighting, a weatherproof display, and landscape audio turn the pool deck into the most-used room of the house after dark.
View case studyWhat we integrate in Castle Rock
Ten disciplines. One system.
Every Castle Rock project is engineered as a single platform — designed, installed, programmed, and serviced by one team. Start with our complete guide to luxury home technology in Denver, or explore a discipline below.
Nearby service areas
We also work in these communities.
Frequently asked — Castle Rock
Answers for Castle Rock homeowners.
When should we bring you into a Castle Rock new build?
As early as schematic design, and no later than framing. Prewire is the cheapest hour of the project and the most expensive one to skip — early involvement means clean lighting layouts, hidden speakers, proper shade pockets, and a rack location that actually works.
Do you coordinate with Castle Rock builders and electricians?
Constantly. We provide low-voltage plans, lighting schedules, and rough-in walkthroughs, and we stay on the trade schedule from prewire through trim and final commissioning.
What happens if we miss the prewire window?
Options narrow and costs rise. Once insulation and drywall are in, wired lighting control, in-ceiling speakers, and shade pockets either require opening finished walls or get replaced with wireless alternatives that are capable but more limited. We track the builder's schedule specifically so this does not happen.
Can you reach a detached shop, barn, or gated entry on acreage?
Yes, and the time to plan it is during site work. Conduit and fiber in an open trench costs a fraction of solving the same problem later. Where trenching is finished or impractical, we use point-to-point wireless links that carry full bandwidth across the property.
Does Castle Rock's elevation and sun exposure affect equipment?
Yes. High-altitude UV is hard on exterior finishes, gaskets, and non-rated hardware, and open sites see more temperature swing. We specify properly rated outdoor equipment, shade or ventilate exterior enclosures, and use automated solar shading to cut heat gain through unshaded glass.
Do you provide documentation the builder can work from?
Yes — low-voltage plans, lighting and keypad schedules, speaker and display locations, shade pocket details, and rack elevations, issued to the full trade team. We then walk the rough-in before insulation so anything misplaced is corrected while the walls are still open.
Ready to begin?