Serving Littleton, Colorado
Custom Home Technology in Littleton.
Full-service AV and home technology for Littleton — lighting, motorized shades, theater, whole-home audio, control, security, and networking for established neighborhoods, foothills homes, and new builds.
About our work in Littleton
A trusted home technology partner in Littleton.
Littleton spans from historic Downtown Littleton to foothills enclaves like Ravenna and Roxborough, and the technology has to meet both ends of that range. We design layered lighting that flatters both classic bungalows and contemporary builds, motorized window treatments that manage the foothills sun, whole-home audio that follows you outdoors, and a single control experience that guests can operate without a manual.
From Roxborough's red-rock ridgelines to Downtown Littleton's renovated main-street homes, our Englewood-based team works directly with homeowners, builders, architects, and designers — design, prewire, installation, programming, and proactive service under one roof.
What's different about a Littleton project
Three distinct markets under one city name.
Historic core, foothills enclaves, and river-corridor builds
Downtown Littleton's Main Street district and surrounding early-century homes carry plaster, balloon framing, and preservation sensitivity. Ravenna and Roxborough are red-rock foothills properties with terrain and distance problems. Columbine Valley and Ken Caryl sit in between as covenant-controlled, large-lot suburban estates. Each demands a different wiring and control strategy, so we scope by neighborhood rather than by square footage.
Red-rock terrain limits wireless and trenching
In Ravenna, Roxborough, and Deer Creek Mesa, sandstone outcrops and steep grade make both trenching and line-of-sight wireless harder than a flat lot. We locate outdoor access points around actual sightlines, use fiber between structures wherever excavation is already happening, and treat gate and driveway connectivity as designed scope rather than an afterthought.
Covenant review in Columbine Valley and Ken Caryl
These communities review anything visible from the street or common areas — exterior cameras, dish and antenna placement, landscape lighting fixtures, and outdoor speaker locations. We select low-profile hardware in approved finishes and document placement for submittal so approval does not hold up the trim schedule.
Historic-home retrofits reward restraint
In Downtown Littleton we minimize wall openings. Wireless lighting control that reuses existing gang boxes, battery-powered shades sized for original window openings, and small in-ceiling or invisible speakers get modern function into a hundred-year-old house without touching the character that made it worth buying.
Recent Colorado work
Projects across the Front Range.
Cherry Hills Village, CO
Cherry Hills Estate
Every subsystem in this Cherry Hills estate now answers to one interface: lighting scenes, shades, music, video, climate, cameras, and gates.
View case study
Cherry Hills Village, CO
Cherry Hills Theater
A purpose-built cinema where the acoustics were designed before the finishes — reference projection, immersive surround, and a room that disappears when the lights drop.
View case study
Greenwood Village, CO
Pool House & Ketra Lighting
Tunable Ketra lighting, a weatherproof display, and landscape audio turn the pool deck into the most-used room of the house after dark.
View case studyWhat we integrate in Littleton
Ten disciplines. One system.
Every Littleton project is engineered as a single platform — designed, installed, programmed, and serviced by one team. Start with our complete guide to luxury home technology in Denver, or explore a discipline below.
Nearby service areas
We also work in these communities.
Frequently asked — Littleton
Answers for Littleton homeowners.
Do you work on new construction and remodels in Littleton?
Yes. We partner with Littleton builders on ground-up homes — coordinating low-voltage prewire, lighting, shading, and control before drywall — and we retrofit existing homes with wireless lighting, battery-powered shades, and discreet audio with minimal disruption.
Can you cover foothills lots in Ravenna and Roxborough with reliable Wi-Fi?
Absolutely. We design enterprise-grade networking with outdoor access points, wired backhaul, and hardened coverage for decks, guest houses, and outdoor entertainment areas that foothills homes are known for.
Is a Roxborough project different from one in Columbine Valley?
Very. Roxborough and Ravenna are terrain projects — grade, rock, distance to gates and outbuildings, and line-of-sight planning for wireless. Columbine Valley is a large-lot covenant community where the constraint is design review and discreet exterior hardware. We scope and price them differently for that reason.
Can you add smart lighting to a historic Downtown Littleton home?
Yes, and usually without opening walls. Wireless lighting control installs into existing gang boxes, battery-powered shades fit original window openings, and audio can be handled with compact in-ceiling or invisible speakers. We keep intervention to a minimum in plaster and balloon-framed construction.
Will Ken Caryl or Columbine Valley approve exterior cameras?
Generally yes, when the hardware is discreet and properly placed. We specify low-profile fixtures in approved finishes, position them to cover approaches without dominating the elevation, and provide documentation for design review submittals when required.
Do you handle gates, driveways, and outbuildings on foothills lots?
Yes — it is standard scope on these properties. Gate intercom and camera, driveway sensing, and connectivity to detached garages, guest quarters, and shops are designed in from the start, using conduit and fiber where excavation allows and point-to-point wireless where the rock says otherwise.
Ready to begin?